[AMRadio] Twin line cord

Steve Belcher wa1zuf at juno.com
Wed Jan 1 10:42:13 EST 2014

Well Max, I have used an "Appliance"  extension cord. It looks as close as 
anything I have found to the original.


Of course state side the preferred method is to use a 3 wire cord and ground 
the chassis. Having taken a hit off a hot chassis, I can appreciate why, 
however if your not living on the edge, your are taking up to  much space... 
(tongue planted firmly in cheek)

Do you folks even carry a ground/earth out to your electrical outlets?

Steve W1TAV

----- Original Message ----- 
From: "Max Cotton" <airradio at dsl.pipex.com>
To: <amradio at mailman.qth.net>
Sent: Wednesday, January 01, 2014 9:12 AM
Subject: [AMRadio] Twin line cord

>I am looking for some 10amp black rubber twin figure 8 line cord to restore 
>a Collins 32v1 transmitter, the old cable has been removed and discarded, 
>is there a supplier that I can use? Cannot find anywhere.
> Secondly it has a home made suppressor circuit in the back, I don't 
> suppose it is so necessary any more now most TV's are cable and digital.
> 73 Max
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Archives: http://mailman.qth.net/pipermail/amradio/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

More information about the AMRadio mailing list

This page last updated 18 Feb 2018.