[AMRadio] Cable splitters for receivers


Brett Gazdzinski b.gaz at comcast.net
Sat Jan 11 18:02:10 EST 2014


I have been using a splitter for years.
I have some that have BNC's on them, and work .2 to 110 MHz.

I have my home brew and sdr-iq bridged together, and both have more then 
enough gain to spare, at least on the lower bands.

The 75 ohm part does not seem to make any difference...

Brett
N2DTS

----- Original Message ----- 
From: "CL in NC" <mjcal77 at yahoo.com>
To: <amradio at mailman.qth.net>
Sent: Saturday, January 11, 2014 12:09 PM
Subject: [AMRadio] Cable splitters for receivers


> Has anybody tried using a CATV splitter that is rated for 5-1000 Mhz to 
> put multiple receivers on one antenna without having to switch?  I know 
> the 5MC rating is cutting off before 80 and 160, but was just curious, 
> maybe they might work below 5 don't know.  I have a CATV switch with F 
> connectors that I stuck some BNC to F adapters on and use on my 129X and 
> BC1004B, but wondered if I can streamline it.
>
> Charlie, W4MEC in NC
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Archives: http://mailman.qth.net/pipermail/amradio/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 



More information about the AMRadio mailing list

This page last updated 22 Nov 2017.