[AMRadio] Using an old Collins amp for AM


Collin via AMRadio amradio at mailman.qth.net
Tue Jan 13 06:39:39 EST 2015


The 32V-2 is what I use most of the time on the AM nets with very good reports. 

Thank You, Collin

> On Jan 12, 2015, at 19:20, wa9vrh <wa9vrh at wildblue.net> wrote:
> 
> Hi Frank,
> Have you tried using the 32V-2 on AM. For the Collins Collectors 1st Wednesday
> AM net I have been using an Elmac AF-68 which runs less power than
> your 32V-2. Might give the 32V-2 a try.
> 73 Larry WA9VRH
> 
>> On 1/12/2015 6:09 PM, FRANK HUGHES hughes wrote:
>> Hi,
>> I would like to be able to participate in some of the AM nets.
>> My 32V-2 only makes 70 watts of carrier. (low voltage selected)
>> I have a good condition Collins 30S-1 that I normally use for SSB.
>> If the power is kept down to about 150 watts of carrier, could I drive the amp w/ the 32V-2?
>> 
>> 
>> My first homebrew amp is under construction, but until it is ready, I am hoping to find a temporary
>> solution.
>> 73
>> Frank
>> KJ4OLL
>> ______________________________________________________________
>> Our Main Website: http://www.amfone.net
>> AMRadio mailing list
>> Archives: http://mailman.qth.net/pipermail/amradio/
>> List Rules (must read!): http://w5ami.net/amradiofaq.html
>> List Home: http://mailman.qth.net/mailman/listinfo/amradio
>> Post: AMRadio at mailman.qth.net
>> To unsubscribe, send an email to amradio-request at mailman.qth.net with
>> the word unsubscribe in the message body.
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> 
> 
> 


More information about the AMRadio mailing list

This page last updated 18 Nov 2017.