wa1zuf at juno.com
Fri Jan 16 20:12:24 EST 2015
I am open wire... I'll never look back to co-ass. :)
Sent via the Samsung Galaxy S™ III, an AT&T 4G LTE smartphone
<div>-------- Original message --------</div><div>From: rbethman <rbethman at comcast.net> </div><div>Date:01/16/2015 12:27 PM (GMT-05:00) </div><div>To: amradio at mailman.qth.net </div><div>Subject: Re: [AMRadio] AM </div><div>
</div>On 1/16/2015 3:11 AM, Donald Chester wrote:
>>>>> The amateur community has been brainwashed into the almighty Bird
> Wattmeter is "the standard".
> Regards, Bob - N0DGN >>>>>
> Just as the AM community has been brainwashed into the p.e.p. nonsense. Case
> in point: " The Scratchy Apache will hold 100W carrier and 400W Modulated
> "Modulated output" my arse. The Apache is a 100-watt transmitter.
> And I might add, I wouldn't have any use for a Bird Wattmeter even if
> someone gave me one. There isn't a sprig of coax anywhere in my entire
> transmitting antenna system, from the plates of the final to the radiating
> element of the antenna. Everything is tied together with link coupling and
> balanced open wire line - the real stuff, #8 and #10 copperweld spaced 2
> 1/2 and 2 inches apart respectively. None of that oversize TV ribbon with
> the square holes punched in the insulation every few inches.
> Don k4kyv
I never posted with the intent of "starting" any form of a back and forth.
However, I would be surprised if the majority of AM Operators use
balanced open wire feeds.
I can only speak for myself, yet I can say that I have never had the
pleasure or displeasure of assembling such.
I am one that has had to move on a fairly constant basis, and have not
been afforded the ability to use such a network of feeders.
I have been "stuck" with coaxial feed lines.
That is where my comments were directed.
End of my commentary.
Regards, Bob - N0DGN
Our Main Website: http://www.amfone.net
AMRadio mailing list
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Post: AMRadio at mailman.qth.net
To unsubscribe, send an email to amradio-request at mailman.qth.net with
the word unsubscribe in the message body.
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the AMRadio mailing list
This page last updated 19 Feb 2018.