[AMRadio] Barker-and-Williamson-850A-tank-coil-assembly need tomake new spacers


Ron.K3PID ron.k3pid at sbcglobal.net
Thu Jun 22 14:53:49 EDT 2017


Hi Jim, I had some luck with slightly smaller coils in the past by using 
some modeling clay to hold the coil in place then ran a heavy bead of hot 
melt adhesive lengthwise at 90 deg increments. Once the hot melt sets up the 
clay is removed and the coil holds it shape fairly well.

Ron K3PID




More information about the AMRadio mailing list

This page last updated 24 Nov 2017.