[Hallicrafters] Thanks for the help!

Richard Knoppow 1oldlens1 at ix.netcom.com
Tue Aug 16 17:03:36 EDT 2011

----- Original Message ----- 
From: "Ted" <tjrachwal at comcast.net>
To: <hallicrafters at mailman.qth.net>
Sent: Tuesday, August 16, 2011 10:05 AM
Subject: [Hallicrafters] Thanks for the help!

> Thanks for help on the S-38A manual.  I'll get right on it 
> and have it
> sailing along....as best it ever was...on those higher 
> bands!
> 73,
> Ted K8AQM

    The only advice I can give is to be very careful in 
adjusting the RF on higher frequencies that the oscillator 
is on the right side of the signal. The set has virtually no 
image rejection so its easy to get on the wrong one. Since 
the AVC can not be disabled the idea is to adjust using the 
lowest signal level you can. These receivers may be only 
gussied-up AA-5's but they work surprizingly well 

Richard Knoppow
Los Angeles
dickburk at ix.netcom.com 

More information about the Hallicrafters mailing list

This page last updated 22 Feb 2018.