From k5mbx at suddenlink.net Sat Jun 4 15:33:35 2016 From: k5mbx at suddenlink.net (Charlie Hugg) Date: Sat, 4 Jun 2016 14:33:35 -0500 Subject: [Hallicrafters] FS Hallicrafters SP-44 Skyrider Panoramic Scope Message-ID: <000301d1be97$fc5fa200$f51ee600$@net> FS Hallicrafters SP-44 Skyrider Panoramic Scope. This scope is very clean. It produces a strong clear trace. That is the only testing that I have done. It has had the power supply solid stated. Some caps have been replaced. Otherwise it looks original. Cabinet paint and lettering are original. Designed to be used with any receiver with a 455 KHz IF. Pictures available. This is the nicest one that I have seen. Price is $195 plus shipping. Thanks, Charlie Hugg, K5MBX From cateswa at msn.com Sat Jun 4 15:40:54 2016 From: cateswa at msn.com (Walt Cates) Date: Sat, 4 Jun 2016 14:40:54 -0500 Subject: [Hallicrafters] Village radio manual Message-ID: I opened another long neglected box and found more treasures. A manual for the TR-30 transceiver is in very good condition and for sale. The cover is gray, heavy card stock faux leather. $15 for the book and shipping. Walt Cates, WD0GOFLife is a series of great opportunities brilliantly disguised as impossible situations. From davemarquart at gmail.com Sat Jun 4 22:50:44 2016 From: davemarquart at gmail.com (Dave Marquart) Date: Sat, 4 Jun 2016 20:50:44 -0600 Subject: [Hallicrafters] HP 70001A In-Reply-To: References: Message-ID: I have a HP 70001A FS. No modules, just the PS, fans, and case. PS powers up and quiet fans. No faults on lamps. $75.00 and you ship. Heavy! Dave W7VT From w7ksg at q.com Mon Jun 6 10:55:21 2016 From: w7ksg at q.com (w7ksg) Date: Mon, 06 Jun 2016 08:55:21 -0600 Subject: [Hallicrafters] SX110 knob removal Message-ID: How to remove the two small aluminum knobs marked ?antenna and standby. I can't seem to find a wrench to fit the screw holding the knob on the shaft. JAC? Sent from my T-Mobile 4G LTE Device From radio at daileyservices.com Mon Jun 6 11:53:11 2016 From: radio at daileyservices.com (radio at daileyservices.com) Date: Mon, 6 Jun 2016 09:53:11 -0600 Subject: [Hallicrafters] SX-28 Recap References: Message-ID: <1BEA60FB4A9D411695088A81D0D57DE0@w0eaj> While hardly a "newbie" at repair/restoration/et. al., I have a WORKING SX-28 of 12/41 vintage!.. and know there are RECOMMENDED ways of doing those caps 'on the dark side'. This one is partially recapped, but yep.. I get to go into the celler for the buried ones. I've found a few sites that seem founded in fact, but is there one that describes the BEST way to complete this ardious task? Tom - W0EAJ --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com From ken at wa0sbu.com Mon Jun 6 13:12:57 2016 From: ken at wa0sbu.com (Ken) Date: Mon, 6 Jun 2016 12:12:57 -0500 Subject: [Hallicrafters] SX110 knob removal In-Reply-To: References: Message-ID: <5755AF19.3040406@wa0sbu.com> My SX-99's knobs take a square bit. I used a flat blade screw driver. On 06/06/2016 09:55 AM, w7ksg wrote: > How to remove the two small aluminum knobs marked antenna and standby. I can't seem to find a wrench to fit the screw holding the knob on the shaft. > JAC > > > > Sent from my T-Mobile 4G LTE Device > ______________________________________________________________ > Hallicrafters mailing list > Home: http://mailman.qth.net/mailman/listinfo/hallicrafters > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Hallicrafters at mailman.qth.net > > List Administrator: Duane Fischer, W8DBF > ** For Assistance: dfischer at usol.com ** > > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From w7ksg at q.com Mon Jun 6 14:05:16 2016 From: w7ksg at q.com (w7ksg) Date: Mon, 06 Jun 2016 12:05:16 -0600 Subject: [Hallicrafters] SX110 knob removal Message-ID: Problem solved. ?Takes a small 4-flute spline. Thanks to the many reponses and suggestions. To many to respond individualy. JAC? Sent from my T-Mobile 4G LTE Device From pincon at erols.com Mon Jun 6 17:26:02 2016 From: pincon at erols.com (Charlie T, K3ICH) Date: Mon, 6 Jun 2016 17:26:02 -0400 Subject: [Hallicrafters] SX110 knob removal In-Reply-To: <5755AF19.3040406@wa0sbu.com> References: <5755AF19.3040406@wa0sbu.com> Message-ID: <014901d1c03a$0aee4a80$20cadf80$@erols.com> Well, they may LOOK square, but I think you'll find they are actually 4 flute Bristol spline drives. If they're square now, someone buggered them. I guess a thin flat blade screwdriver "may" work, but you'd be much better off using the proper tool. 73, Charlie k3ICH -----Original Message----- From: Hallicrafters [mailto:hallicrafters-bounces at mailman.qth.net] On Behalf Of Ken Sent: Monday, June 06, 2016 1:13 PM To: hallicrafters at mailman.qth.net Subject: Re: [Hallicrafters] SX110 knob removal My SX-99's knobs take a square bit. I used a flat blade screw driver. On 06/06/2016 09:55 AM, w7ksg wrote: > How to remove the two small aluminum knobs marked antenna and standby. I can't seem to find a wrench to fit the screw holding the knob on the shaft. > JAC > > > > Sent from my T-Mobile 4G LTE Device > ______________________________________________________________ > Hallicrafters mailing list > Home: http://mailman.qth.net/mailman/listinfo/hallicrafters > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Hallicrafters at mailman.qth.net > > List Administrator: Duane Fischer, W8DBF > ** For Assistance: dfischer at usol.com ** > > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html ______________________________________________________________ Hallicrafters mailing list Home: http://mailman.qth.net/mailman/listinfo/hallicrafters Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Hallicrafters at mailman.qth.net List Administrator: Duane Fischer, W8DBF ** For Assistance: dfischer at usol.com ** This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From bmarx at bellsouth.net Tue Jun 7 17:09:56 2016 From: bmarx at bellsouth.net (Bill) Date: Tue, 7 Jun 2016 17:09:56 -0400 Subject: [Hallicrafters] Hammarlund ED-4 Transmitter Message-ID: A friend is looking for a Hammarlund ED-4 Transmitter. Please send me a note if you have or know of one for sale. Bill W2CQ From w7ksg at q.com Tue Jun 14 21:03:03 2016 From: w7ksg at q.com (w7ksg) Date: Tue, 14 Jun 2016 19:03:03 -0600 Subject: [Hallicrafters] FS HALLICRAFTERS SX110 Message-ID: Excellent original condition. All functions checked controls and switches cleaned. Front panel markings clear and distinct. Chassis clean. Non smoking environment. RF and IF stages aligned. Cabinet in very good condition with few minor, scratches ?but no dents. ?$150.00 plus $29.95 shipping? J Sent from my T-Mobile 4G LTE Device From w7ksg at q.com Tue Jun 14 21:28:56 2016 From: w7ksg at q.com (w7ksg) Date: Tue, 14 Jun 2016 19:28:56 -0600 Subject: [Hallicrafters] SX110 Message-ID: <8v5fdqfciobw960j8tpb4l4e.1465954136385@email.android.com> Sold. Thanks JAC? Sent from my T-Mobile 4G LTE Device From n8azc at sssnet.com Fri Jun 17 21:10:23 2016 From: n8azc at sssnet.com (Mike Lopez) Date: Fri, 17 Jun 2016 21:10:23 -0400 Subject: [Hallicrafters] Saturday Net Message-ID: <005101d1c8fe$30c302b0$92490810$@sssnet.com> Please join us tomorrow, Saturday June 18, 2016 at 12:00 Noon on 7.280Mhz for the Hallicrafters Collectors Net. See You There !!! Duane W8DBF & Mike N8AZC From w5jo at brightok.net Fri Jun 17 21:50:50 2016 From: w5jo at brightok.net (w5jo at brightok.net) Date: Fri, 17 Jun 2016 20:50:50 -0500 Subject: [Hallicrafters] Saturday Net In-Reply-To: <005101d1c8fe$30c302b0$92490810$@sssnet.com> References: <005101d1c8fe$30c302b0$92490810$@sssnet.com> Message-ID: <3822AB2BFD254821BC35337F880D16B1@JimPC> 12 Noon where? -----Original Message----- From: Mike Lopez Sent: Friday, June 17, 2016 8:10 PM To: hallicrafters at mailman.qth.net Subject: [Hallicrafters] Saturday Net Please join us tomorrow, Saturday June 18, 2016 at 12:00 Noon on 7.280Mhz for the Hallicrafters Collectors Net. See You There !!! Duane W8DBF & Mike N8AZC From pincon at erols.com Fri Jun 17 23:12:22 2016 From: pincon at erols.com (Charlie T, K3ICH) Date: Fri, 17 Jun 2016 23:12:22 -0400 Subject: [Hallicrafters] Saturday Net In-Reply-To: <3822AB2BFD254821BC35337F880D16B1@JimPC> References: <005101d1c8fe$30c302b0$92490810$@sssnet.com> <3822AB2BFD254821BC35337F880D16B1@JimPC> Message-ID: <018401d1c90f$3ebd49a0$bc37dce0$@erols.com> That's why net times should always be specified in UTC. 73, Charlie k3ICH -----Original Message----- From: Hallicrafters [mailto:hallicrafters-bounces at mailman.qth.net] On Behalf Of w5jo at brightok.net Sent: Friday, June 17, 2016 9:51 PM To: hallicrafters at mailman.qth.net Subject: Re: [Hallicrafters] Saturday Net 12 Noon where? -----Original Message----- From: Mike Lopez Sent: Friday, June 17, 2016 8:10 PM To: hallicrafters at mailman.qth.net Subject: [Hallicrafters] Saturday Net Please join us tomorrow, Saturday June 18, 2016 at 12:00 Noon on 7.280Mhz for the Hallicrafters Collectors Net. See You There !!! Duane W8DBF & Mike N8AZC ______________________________________________________________ Hallicrafters mailing list Home: http://mailman.qth.net/mailman/listinfo/hallicrafters Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Hallicrafters at mailman.qth.net List Administrator: Duane Fischer, W8DBF ** For Assistance: dfischer at usol.com ** This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From n8azc at sssnet.com Fri Jun 17 23:39:40 2016 From: n8azc at sssnet.com (Mike Lopez) Date: Fri, 17 Jun 2016 23:39:40 -0400 Subject: [Hallicrafters] Saturday Net In-Reply-To: <3822AB2BFD254821BC35337F880D16B1@JimPC> References: <005101d1c8fe$30c302b0$92490810$@sssnet.com> <3822AB2BFD254821BC35337F880D16B1@JimPC> Message-ID: <005601d1c913$0bc5a980$2350fc80$@sssnet.com> Sorry, 12 Noon Eastern DST, 16:00 UTC. Provided there is some cooperation of propagation! -----Original Message----- From: Hallicrafters [mailto:hallicrafters-bounces at mailman.qth.net] On Behalf Of w5jo at brightok.net Sent: Friday, June 17, 2016 9:51 PM To: hallicrafters at mailman.qth.net Subject: Re: [Hallicrafters] Saturday Net 12 Noon where? -----Original Message----- From: Mike Lopez Sent: Friday, June 17, 2016 8:10 PM To: hallicrafters at mailman.qth.net Subject: [Hallicrafters] Saturday Net Please join us tomorrow, Saturday June 18, 2016 at 12:00 Noon on 7.280Mhz for the Hallicrafters Collectors Net. See You There !!! Duane W8DBF & Mike N8AZC ______________________________________________________________ Hallicrafters mailing list Home: http://mailman.qth.net/mailman/listinfo/hallicrafters Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Hallicrafters at mailman.qth.net List Administrator: Duane Fischer, W8DBF ** For Assistance: dfischer at usol.com ** This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From w7ksg at q.com Tue Jun 21 12:19:26 2016 From: w7ksg at q.com (w7ksg) Date: Tue, 21 Jun 2016 10:19:26 -0600 Subject: [Hallicrafters] WTB-KNOB set S120 Message-ID: What is available? ?Thanks. JAC? Sent from my T-Mobile 4G LTE Device From magnuson at mac.com Thu Jun 30 14:27:27 2016 From: magnuson at mac.com (Waldo Magnuson) Date: Thu, 30 Jun 2016 11:27:27 -0700 Subject: [Hallicrafters] FS: Hallicrafters DD-1 receiver. Message-ID: For Sale: Hallicrafters Skyrider Diversity - Model DD-1 receiver. Serial number H-80534. See in Western Historic Radio Museum site. Very, very nice table model (table included). Used frequently on BCB. Very clean and original, only power supply and audio stage capacitors replaced, can be restored easily. I will drive to meet half way up to 500 miles from Spokane, WA. $6500. Email me with any questions.

This page last updated 27 Jul 2017.